Rack and pinion replacement cost
The average rack and pinion replacement costs $2,307 – $2,572 at a repair shop, before taxes and fees. Parts run about $1,770 – $1,784 and labor about $537 – $787. A remanufactured rack can lower the price considerably. An alignment is needed afterward.
Quick answer
$2,307 – $2,572parts and labor
Most drivers pay $2,307 – $2,572. On popular models the estimate ranges from $1,995 to $2,697, depending on the vehicle.
Average rack and pinion replacement cost
| Item | Typical cost |
|---|---|
| Parts | $1,770 – $1,784 |
| Labor | $537 – $787 |
| Total (national average) | $2,307 – $2,572 |
Before taxes and fees. Source: RepairPal national estimate, September 2026.
- Labor$537–$78727%
- Parts$1,770–$1,78473%
Share of a typical repair bill, using the middle of each range.
Cost by vehicle
| Vehicle | Estimated cost |
|---|---|
| Chevrolet Silverado 1500 | $1,995 – $2,139 |
| Ford F-150 | $2,148 – $2,336 |
| Toyota Camry | $2,167 – $2,697 |
RepairPal estimates for recent model years; your year, engine and trim can change the price.
What the job involves
The rack and pinion turns steering wheel motion into side-to-side movement of the wheels. On cars with electric power steering, the motor is often part of the rack, which raises the parts price.
Warning signs
- Power steering fluid leaking from the rack boots
- Loose or notchy steering
- Clunking when turning
- Steering warning light on electric racks
What changes the price
- Your vehicle. Parts for trucks, European and luxury models usually cost more, and on some engines the mechanic has to remove other parts first, which adds labor hours.
- Where you go. Dealers often charge 25% or more above independent shops. Most shops bill about $120 to $159 an hour (AAA, citing a 2025 PartsTech survey).
- The parts. OEM (factory) parts cost more than aftermarket or remanufactured parts. Ask which ones the estimate uses and what warranty comes with them.
- Extras. Related parts found during the job, fluids, shop supply fees and sales tax are not included in these averages.
How to get a fair estimate
- Ask for a written estimate that lists parts, labor hours and the shop’s hourly rate before any work starts.
- Ask whether the quote uses OEM, aftermarket or remanufactured parts, and what warranty comes with the parts and the labor.
- Get a second quote for any repair over a few hundred dollars. Independent shops often charge less per hour than dealers.
- Ask the shop to show you the old part or the reading that proves it failed, and to call you before doing extra work.
- Check for recalls and warranty coverage first: many powertrain, emissions and hybrid parts carry longer factory warranties.
Frequently asked questions
How much does rack and pinion replacement cost?
About $2,307 to $2,572 on average at a repair shop, including $1,770 to $1,784 for parts and $537 to $787 for labor, before taxes and fees.
Sources
Prices are national averages and typical ranges from published cost data. Your price depends on your vehicle, location, parts and shop, so get a written estimate. Car Repair Atlas is not a repair shop; read our disclaimer.